YATES ANSI FR Lanyard w/ PETZL ASAP Lock

The YATES ANSI FR Lanyard w/ PETZL ASAP Lock is easiest back-up system on the marked to use for vertical life line applications. Complaint with the new ANSI Z359.15-2014 Standard. This self-trailing function is important for transmission tower work climbing techniques especially while down climbing a tower. Yates has manufactured a 40 cm lanyard specifically designed for the PETZL ASAP Lock® that meets the new ANSI Z359.15-2014 Standard. The YATES Lanyard was specifically designed for the Petzl ASAP Lock and to be compliant with Arc Flash requirements of ASTM F887. This new ANSI Complient YATES Lanyard for PETZL ASAP Lock is constructed from 1" Kevlar webbing. The Shock Pack on the lanyard is designed to limit a FF2 fall(46") to an average activation force of under 900 lbf. PBI/NOMEX Covering over shock pack keeps shock absorbing tear tape from exposure to excessive heat in Ark Flash situations. YATES Lanyard for PETZL ASAP also meets the requirements of a lanyard designed to be used on Welding, Grinding and Cutting operations at height.

The YATES Lanyard and PETZL ASAP Lock combination is specifically designed to be compatable with BlueWater 12mm ArmorTech rope with a Teflon Coating. The new Teflon Coating not only makes hte rope less absorbant of water, it also allows the rope to resist attachment of dirt and dust making is less conductive. The New 12mm Armortech Dry Rope is certified under the ANSI Z359.15-2014 standard be be under 10% stretch at 1,800 lbf. The rope is marked ANSI Z359.15-2014 complient

The YATES ASAP Lanyard can be ordered seperatly without PETZL ASAP Lock right here - YATES ANSI FR Lanyard